Hebei Lansheng Biotech Co., Ltd.
Beijing Multigrass Formulation Co., Ltd.

Arkansas scientists employ machine learning to manage corn crops more efficientlyqrcode

Sep. 19, 2019

Favorites Print
Sep. 19, 2019
Professors Jia Di, left, and Trent Roberts inspect a prototype corn sensor set up in a test plot at the Arkansas Agricultural Research and Extension Center.

A team of researchers from the University of Arkansas System Division of Agriculture and the University of Arkansas College of Engineering is designing tiny sensors that can be placed in corn stalks to monitor water, nitrogen and potassium needs in real time.

The data collected from those sensors — matched with geographic, weather and other environmental data — will feed machine learning software to develop models that will be able to predict when a crop will need those inputs before the conditions exist. Those predictive models can help corn growers give their crops exactly the water and nutrients they need, before they experience stress, to achieve the best possible yields without wasting resources.

The collaborative research by the division's Arkansas Agricultural Experiment Station and the university's College of Engineering is supported by the Chancellor's Discovery, Creativity, Innovation and Collaboration Fund.

Dealing With Stress

"By the time you see drought stress or nutrient deficiency, you've already lost some yield," said Trent Roberts, associate professor of crop, soil and environmental sciences for the Arkansas Agricultural Experiment Station and Dale Bumpers College of Agricultural, Food and Life Sciences.

Farmers deal with these issues now in one of two ways, Roberts said. "A high-inputter is proactive, over-applying water and nutrients in order to avoid stress or deficiencies." That approach maintains optimal yields, he said, but it comes with high costs for fertilizers, fuel to run equipment and pump water.

"A low-inputter waits until he sees stress or nutrient deficiency," Roberts said. "He may save money on the front end, but may lose yield at harvest."

A model that can predict a crop's water and nutrient needs before they occur can cut the costs of over-applying without losing yield, Roberts said.

Smart Technology

To develop such a system, Roberts joined a team of researchers that includes Jia Di, professor and 21st Century Research Leadership Chair in the department of computer science and computer engineering; Alan Mantooth, Distinguished Professor and 21st Century Research Leadership Chair, and professor Simon Ang, both from the department of electrical engineering; and Jie Xiao, associate professor of chemistry and Arkansas Research Alliance Scholar.

They developed a tiny sensor that is inserted into a cornstalk near its base. Di said they began with dummy sensors to test materials and dimensions that could accommodate the electronics without impeding the growth and development of the plant.

"The electronics can be very small," Di said, "but the limit on miniaturization is the antenna. It must be large enough to send a signal to a base station."

The resulting sensor looks like a slightly oversized thumbtack. The current prototype was manufactured by the University of Arkansas High Density Electronics Center and it relies on an external power source. Di said they have developed a microbattery that will be integrated into the sensor and the electronics in the next prototype to be produced in October.

The sensor is able to measure specific parameters in real time, Roberts said. "We're focusing on drought stress, nitrogen content and potassium content."

To measure that information now, Roberts said, requires researchers to take tissue samples, send them to a lab and wait for test results. "It's time consuming and expensive," he said.

"So far, we've been testing proof of concept," Roberts said. "And we have a viable sensor."

To develop predictive models, Di said, the data from the sensors will be fed into a machine learning program along with environmental data, including soil texture, planting date, weather data, geographic location and other information that affects plant growth and productivity.

The more information is gathered over time, Di said, the more accurate the predictive models become.

Next Steps

"Now that we have a working sensor," Roberts said, "the next step is to see how many we need in a field to get useful data. We're right in the middle of the process."

Di said the research team will also be determining the best means of collecting the data. The sensors are designed to transmit to a base station, but Di said he doesn't think putting that station permanently in the field is the best option. "I think we'll probably attach the base station to a tractor or truck and drive around the field to collect the data."

Each sensor has an ID code so they'll know where in a field each data set came from.

"Next, we want to develop a sensor that dissolves in the field after harvest," Roberts said. That saves the time and labor of finding and removing each one year after year.

Right now, the sensors are limited to use in corn. Di said the sensors are too large to insert into crops with smaller stalks or stems. "But advances in electronics could lead to smaller sensors that could be applied to smaller plants," he said.

Picture 0/1200

More from AgroNews


2020 Biologicals Special 2020 Latin America Focus
2020 Formulation & Adjuvant Technology Annual Review 2019
Chinese issue of Annual Review 2019 2019 CRO & CRAO Manual
Subscribe Comment


Subscribe Email: *
Mobile Number:  


Picture 0/1200

Subscribe to daily email alerts of AgroNews.